H3C Technologies H3C MSR 50 - Manual (Page 13)

7
Enabling ACFP server
Follow these steps to enable the ACFP server:
To do… Use the command… Remarks
Enter system view system-view —
Enable the ACFP
server
acfp server enable
Required
Disabled by default
Configuring the ACFP client
You must configure the ACFP collaboration policy and ACFP
collaboration rules on the ACFP client through MIB. The specific
configuration depends on the service software used on the ACFP client.
NOTE:
•
For more information about ACFP configuration, see the H3C MSR
Series Routers OAA Configuration Guide .
• Enable the ACFP server only on the router installed with OAP/OAPS
modules that require the ACFP function.
ACSEI configuration
Introduction to ACSEI
As a private protocol, ACSEI provides a method for exchanging
information between ACFP clients and ACFP server. It well supports
Application Control Forwarding Protocol (ACFP) collaboration, ensuring
valid information interaction between the ACFP clients and the ACFP
server, so that the ACFP server and clients can cooperate to run a service.
As a supporting protocol of ACFP, ACSEI also has two entities: server
and client.
• ACSEI server is integrated into the software system of the router and is
supported by the router.