Epson PhotoPC 700 - Manual (Page 64)

Note:
To cancel printing, hold down the camera’s BACK button
for about three seconds. A message stating printing is
canceled appears on the LCD screen for three seconds,
before returning to the Direct Print menu. The printer
stops printing and ejects the paper.
8. When printing is finished, the LCD screen returns to
the Direct Print menu, and the display panel returns
to normal.
When you finish printing, close the Direct Print program
by pressing the BACK button. Then slide the monitor
mode switch to OFF and turn off the printer.
Card print mode
1. Access the Direct Print program as described on page
4-4. Press the button to highlight Layout, then
press the SELECT button. With Card selected, press
the SELECT button again.
2. Select Photo and press the SELECT button. Choose All
if you want to print all the images, then press the
SELECT button once more.
If you want to print an individual image, choose Select.
Thumbnail images of the first nine photos in your
camera appear with the currently selected image
framed in blue. Press the
or button to frame
the image you want to print, then press SELECT. You
can select several images at the same time.
3. To change the paper type, position (top, center, bottom,
or full-size), number of copies (1-99), color, printing
mode, and whether to print the date and time the
photo was taken, press the
or button to
select the option you want to change, then press the
SELECT button. The settings for that option appear on
the screen.
4. Press the or button to select a setting, then
press the SELECT button.
5. Connect the camera to the printer as described on page
4-2, then turn on the printer and load the size and
type of paper you selected. For paper loading
instructions, see your printer User’s Guide.
6. When you are ready to start printing, press the
button to select Print.
L
Poppy+ Rev.C
A5 size Chapter 4
5/8/98 DR, pass 0
4-10 Using the Direct Print Program