Grass Valley 2090MDC - Manual (Page 23)

2090MDC Instruction Manual 17
Specifications
Specifications
Table 5. 2090MDC Specifications
Parameter Value
Serial HD Input
Number and type of inputs 1 BNC
Input impedance 75 Ohm
Input signal formats 1.5 Gbit serial digital conforming to the following SMPTE formats:
240M (1920/1035i 59.94/60 Hz),
274M (1920/1080i 59.934/60 Hz)
295M (1920/1080i 50 Hz)
296M (1280/720p 59.94/60 Hz)
Signal level 800 mV ±10%
Return loss >15 dB to 1.5 GHz
Serial HD Outputs
Number and type of outputs 2 BNC
Output impedance 75 Ohm
Output signal formats 1.5 Gbit serial digital conforming to the following SMPTE formats:
240M (1920/1035i 59.94/60Hz),
274M (1920/1080i 59.934/60 Hz)
295M (1920/1080i 50 Hz)
296M (1280/720p 59.94/60 Hz)
Output level 800 mV ± 10%
Return loss >10 dB to 1.5 GHz
Serial Digital Outputs
Number and type of outputs 2 BNC
Output impedance 75 Ohm
Signal type Serial digital video conforming to SMPTE 259M 10-bit 4:2:2 com-
ponent standard
Signal level 800 mV ±10%
Return loss >15 dB to 270 MHz
NTSC/PAL Analog Composite Outputs
Number and type of outputs 2 BNC
Output impedance 75 Ohm
Signal type Conforming to SMPTE 170M (NTSC), CCIR-624 (PAL)
Signal level 1 V p-p
Differential gain 0.3%
Differential phase 0.4 °
Luminance nonlinearity ± 1%
Chroma nonlinear gain ± 1.2%
Chroma nonlinear phase ± 0.3 °
Frequency response – luma ± 0.1 dB @ 5.5 MHz
Frequency response – chroma -2 dB @ 1.3 MHz
Return loss > 40 dB to 5.5 MHz
Analog Component Outputs