And outputs, Settings web page – Grass Valley 8945EDA v.1.0.0 User Manual
Page 19
8945EDA and 8945EDA-D Instruction Manual
19
Remote Configuration
Settings Web Page
The Settings web page for 8945EDA (
) and 8945EDA-D (
) provides a reporting of signal control for both DA outputs group.This
page gives the model, the description and the frame location. The input configura-
tion is made on this web page.
The different parameters are explained below:
•
Coax 1 and 2 – Choice of J9 or J10 inputs (only J9 for the 8945EDA module)
and outputs.
•
Input Reporting – Choose between Enable or Disable. The Enable parameter
raises alarms towards 8900NET on the input signals (presence of signal). The
color of arrows on the Status page will be automatically changed. The Disable
parameter will change the color of arrows on the Status web page to grey to
show they are not being monitored or reported to upper level control devices.
•
Equalizer Mode – If the Active parameter is chosen, the equalizer is used. Oth-
erwise, the equalizer is bypass.
•
Signal Format – Indicates the input signal format. The choice is between
SD/ASI and HD. This parameter acts on the rise and fall time value.
•
Carrier Detect – Indicates the input signal detection of DA1 or DA2 (for
8945EDA-D).
Figure 11. Settings Page for 8945EDA Module
Use
this
link