Grass Valley 8950ADC User Manual
Page 26
26
8950ADC Instruction Manual
Configuration
Video and Black Levels
If required, Video and Black levels for each channel can be adjusted as
needed after the selected format defaults have been loaded.
Levels can be set in
Independent
mode (Y/G, Cb/B, and Cr/R individually)
or in
Locked
mode (all channels at once with any of the three controls). Use
the
Control Action
pulldown to select either
Independent
or
Locked
.
Make Level adjustments with the controls provided. You may use the
arrow controls or enter a number with the keyboard.
If you have made level changes, save these if desired with the Save User
Settings function (see
User Settings Web Page on page 29
).
Horizontal delay, sync source, and vertical blanking are not changed by
this reset so these user adjustments are retained. This differs from the
Get
Factory Defaults
function which returns these values to factory calibration.
The Level web pages differ slightly between formats. The Black controls
will be labeled differently for the specific formats.