Grass Valley ADVC G4 - Manual (Page 4)

Notes on installation
Install the product where there is(are) a power socket(s) nearby, and where you can
easily shut down the power to the product.
Do not operate this product from a power source that supplies more than the specified
voltage.
Use only a power source that complies with the description on the specification label of
the product.
CAUTION
The following conditions indicate the potential for bodily harm, damage to hardware or
loss of data.
Do not place the product on an unstable place
Do not place the product on an unstable table or slanted surface. The product may fall
from it, resulting in injuries or malfunction of the product.
Turn OFF the power when cleaning the product
When making connections with the product or cleaning the product, be sure to disconnect
the power plug beforehand. Failure to do so may result in electric shock or malfunction
of the product. When cleaning the product, do not use volatile solvents such as thinner.
Use proper power cable
To avoid fire hazard, use only the power cable specified for this product.
Do not modify the power cable
Do not modify the power cable. Doing so may result in fire or malfunction of the product.
Route the cables properly
Route the power cable and AV cables properly. If they catch on something, it may result
in injuries or malfunction of the product.
Do not cover the product ventilation
Do not use the product covered with a cloth or in an ill-ventilated room.
Covering the vent may cause heat inside of the product resulting in fire or product
malfunction.
If product will not be used for an extended period
If this product will not to be used for an extended period of time, disconnect the power
cable from the electrical outlet.
Do not step on the product or put heavy objects on it
You may fall, or the object may fall off and get broken, thus causing injury.