Grass Valley AMX-1842 - Manual (Page 5)

AMX-1842 HD/SD 4 AES Embedder
Guide to Installation and Operation
AMX-1842 Page 5 of 10
[] Parameter to select
** Press Select pushbutton to activate selection.
Underlined values in the parameter value lists are the factory
default values, and will be applied when factory default-restore
is selected.
[RESTORE]
[ GREEN, YELLOW, RED, FLASH RED ]
[ GREEN, YELLOW, RED, FLASH RED ]
[ GREEN, YELLOW, RED, FLASH RED ]
[ OFF, ON ]
[ OFF, ON ]
[ GREEN, YELLOW, RED, FLASH RED ]
[ GREEN, YELLOW, RED, FLASH RED ]
ALARM LEVEL
[ NONE, GPI ]
x
x x
[ NONE, ODD, EVEN ] x
x x
x
x x
x x
x
x x
x
x
x
x x
x x
x x
x
[ PASS, OVERWRITE ]
[ PASS, OVERWRITE ]
TC LOOP
ANC SIGNALS** RS-422
SAMPLED GPI 1
[ OFF, ON ]
SAMPLED GPI 2
COLOR BAR
[ OFF, TONE ]
TEST** AES IN 1
AUTO BLACK**
[ OFF, TONE ]
[ OFF, TONE ]
[ OFF, TONE ]
EMBED
ALARM LEVEL
ALARM REPORT
NO AES3 ALARM LEVEL
ALARM REPORT
ALARM REPORT
ALARM LEVEL
ALARM REPORT
FACTORY DEFAULT**
AES IN 2
AES IN 3
AES IN 4
NO SIGNAL
NO AES1
NO AES2
TEST MODE
CONFIG ALARM**
AMX-1842:XXX
x
x
VERSION
PARITY
BAUD RATE
NO LTC IN
x
NO AES4
x
x
[ NONE, GPI ]
[ NONE, GPI ]
[ NONE, GPI ]
[ GREEN, YELLOW, RED, FLASH RED ]
[ NONE, GPI ]
[ NONE, GPI ]
[ GREEN, YELLOW, RED, FLASH RED ]
[ NO, YES ]
ALARM REPORT
ALARM REPORT
[ 38.4 Kb, 115 Kb]
ALARM LEVEL
ALARM REPORT [ NONE, GPI ]
ALARM LEVEL
ALARM LEVEL