Grass Valley ADX-1901 - Manual (Page 23)

GUIDE TO INSTALLATION AND OPERATION
ADX-1901 | 19
• If you select this option, the SUM (A+B) Level pull-down is activated, allowing you to reduce the level of the
summed output (0dB, -3dB or -6dB).
Mix: The output channel is a mono mix of source channels selected in sub-menus SOURCE A and SOURCE B.
Mute: Mute the audio channel by checking this box.
Clipping: indicates a very high level at the output, resulting in signal clipping.
Source A & Source B: These sub-sections allow the source channels (A and B) to be selected for each output
channel.
Channel: CH 1, …, CH 16: selects the demuxed input channel to be used for this output channel mixer input.
Level (dB): Sets the audio gain of the source from -96 to +12 dB in 0.5 dB steps
5.5.2 Config tab
0 dBFS Output – The tab contains a single pulldown allowing
selection of the digital-to-analog conversion ratio for maximum
output level.
Choices available: 0 to +24 dBu
Figure 5-9 Audio Output - Config tab