Grass Valley FOL-1601 - Manual (Page 11)

GUIDE TO INSTALLATION AND OPERATION
FOL-1601 | 7
FACTORY DEFAULT – activate this command to restore the configuration of the FOL-1601 to a factory
default state. The settings of the factory default state are indicated in the menu by an underline in the list of
possible values in square brackets, e.g. [OFF, ON] indicates that OFF is the factory default value.
3.4 Remote Control Using the RCP-100
The FOL-1601 can be controlled through a menu accessible using Miranda’s RCP-100 remote control panel.
Please refer to the RCP-100 Guide to Installation and Operation for detailed instructions on installing and
operating the RCP-100, and for instructions on how to connect the RCP-100 to the FOL-1601 (or any other
supported card) so that the menu can be accessed.