Grass Valley RTic v.2.43 - Manual (Page 34)

RTic User Manual- document version: 2.43 - 34
15 Decisions how to
15.1 Defining a decision
Use the Process > Decision object to specify a decision string: if the string is matched, data is passed.
 Insert two Source or Process objects:
1. the first object outputs the data you want to send to the target
2. the second object outputs the decision string
 Insert a Process > Decision object.
 Link the objects inserted in the first step to the Decision object. Make sure to link the object that sends
the decision parameter second in order (yellow arrow).
 Double-click the Decision object to edit.
 In the Decision parameter box, enter the decision string.
 Click Save, then close object.
15.2 Reversing the decision
To reverse the decision – i.e. only pass data if the decision string is not matched - check the Decision
object's Inverse box.
15.3 Comparing sources 1 and 2
To compare sources 1 and 2 (only pass data if output from sources 1 and 2 is the same) leave the
Decision parameter box empty.