Extreme Networks BlackDiamond 12804 - Manual (Page 28)

BlackDiamond 12800 Series Modules
BlackDiamond 12800 Series Switches Hardware Installation Guide 28
XM-2HR I/O Module
Figure 13 shows the XM-2HR I/O module.
Figure 13: XM-2HR I/O Module
The XM-2HR I/O module has 10 SFP ports and 10 autosensing 10/100/1000BASE-T ports that use
standard RJ-45 connectors. In addition, it has one unpopulated XENPAK-based 10-Gigabit Ethernet
port.
The default configuration of the XM-2HR I/O module is as follows. All ports:
● Are added to the default VLAN as untagged.
● Inherit the properties of the default VLAN (for example, protocol type and VLANid).
In addition, the 10/100/1000BASE-T ports and SFP ports operate in autonegotiation mode.
XM-2HR LEDs
The XM-2HR I/O module has the following LEDs:
● Module status
● Module diagnostics
● Port status
Module status
LEDs
10 Gbs ports
BD_167
10/100/1000BASE-T ports
Mini-GBIC
fiber ports