Extreme Networks BlackDiamond 12804 - Manual (Page 97)

Extreme Networks 325 W AC Power Supply
BlackDiamond 12800 Series Switches Hardware Installation Guide 97
Figure 58: Securing the Extreme Networks 325 W AC PSU
Installing Retaining Brackets and Connecting Power
A power cord retaining bracket is shipped with each 325 W AC PSU. These brackets hold the power
connectors in the power sockets and prevent accidental disconnection due to earthquakes, vibration, or
other disturbances. Install the power cord retaining brackets before you connect the power cords.
To install the brackets and connect power to the switch:
1 Attach a power cord retaining bracket to each installed PSU as follows:
a Remove the two screws from the AC input socket on the PSU (see Figure 59 ).
b Using the screws and spacers provided with the bracket, attach the retaining bracket to the AC
input socket as shown in
Figure 59 .
c Tighten the screws to secure the power cord bracket.
Figure 59: Attaching the AC Power Cord Retaining Bracket
Torino AC PSU_02
2
1
Torino AC PSU_07
1 2 3