Edimax Technology ADSL USB Modem AR-7025Um - Manual (Page 4)

3
4. Driver Installation
4.1 Before You Start
The following information may be required for software installation. Contact your DSL
service provider before proceeding with software installation.
• IP Address Settings – the software installation process allows the server to
dynamically assign IP Address settings. If your application requires static setting of
specific address information you will need to know:
IP Address
Subnet Mask (for Bridged Ethernet applications only)
Default Gateway (for Bridged Ethernet applications only)
• Name Server Information – the software installation process allows the server to
dynamically assign Name Server Address settings. If your application requires static
setting of specific address information you will need to know:
Primary DNS Address
Secondary DNS Address
Primary WINS Address
Secondary WINS Address
• Type of Driver to be installed – WAN and LAN software drivers are supported.
Note: Required if not using default value
• ATM Virtual Path ID (VPI)
Note: Required if not using default value
• ATM Virtual Circuit ID (VCI)
Note: Required if not using default value
• Encapsulation
type
Note: Required if not using default value
• Modulation
type
Note: Required if not using default value
• User Name (for PPP applications only)
• Password (for PPP applications only)
4.2 Installing USB ADSL Modem
Step 1: When system detect new hardware, the Microsoft Windows “Found New Hardware
Wizard” will be displayed, click “Cancel”.