Control panel ui board removal – Grass Valley K2 Dyno Replay Controller User Manual
Page 60
Advertising
60
K2 Dyno Replay Controller Service Manual
June 16, 2009
Chapter 4 Removing and replacing FRUs
Control panel UI board removal
To remove the control panel UI board, first remove the jog knob, then proceed as
illustrated.
After the jog knob and nut are removed, remove the T-bar lever handle and the top,
then work on the top unit separately, as in the following illustrations.
Remove nut and toothed wa
s
her.
U
s
e 5/16” wrench.
Advertising