Epson A381H - Manual (Page 11)

PictureMate Snap (PM 240)
8/06 PictureMate Snap (PM 240) - 11
4. Press or to highlight Fix Photos , then press OK .
5. Select Brightness , Saturation , or Sharpness , then press
OK . You see your photo next to the menu:
6. Press or to increase or decrease the setting. You can
see the changes on your photo.
7. When the photo looks good, press OK .
8. At the next screen, select whether to apply the setting to the
current photo or all photos, then press OK .
9. Repeat steps 3 through 8 to make other adjustments to the
same photo, if necessary. Or repeat steps 1 through 8 to fix
more photos.
10. Press OK to select the current photo for printing. Or you
can print all photos or a range of photos (as described on
page 6).
11. Adjust any other settings you want, then press Print to
print your photos.
Storing and Displaying PictureMate Prints
Photos printed on PictureMate photo paper are beautiful,
long-lasting images. Follow these guidelines to make sure they
will look great for generations.
Storing Your Prints
❏ Do not rub the printed side of the photo.
❏ Do not stack photos with the printed sides touching.
Displaying Your Prints
❏ Let prints sit for 24 hours before framing.
❏ To ensure prints will last as long as possible, display them
under glass or in photo albums.
❏ Keep prints out of the sun to help prevent fading.
Storing Unused Paper
Return unused paper to the original package. Store paper flat
to prevent curling, and keep it away from extreme
temperatures, high humidity, and bright light.
Using the Optional Battery
To buy the optional battery, check with your PictureMate
retailer or go to www.MyPictureMate.com.
With a fully charged battery, you can print about 100 photos.
Installing the Battery
1. Make sure PictureMate is turned off.
2. Unplug the AC adapter from PictureMate.
3. Release the latch and remove the battery cover from the
back of the printer.
4. Insert the battery as shown until it clicks into place.
Charging the Battery
After you install the battery, you need to charge it by
connecting the AC adapter and plugging in the printer.