Adding expansion ports – Grass Valley K2 10G RAID User Manual
Page 67
67
K2 10G RAID Storage Instruction Manual
18 November 2010
Chapter 3 Servicing the K2 10G RAID
1. Remove the controller from the chassis. For information on how to remove the
controller, see
“Replacing a RAID controller or expansion adapter” on page 64
.
2. Remove the cover by sliding it while pressing the lock, as indicated in following
diagram.
3. Holding the battery plug, unplug it from the controller. Do not pull while holding
on the cable.
4. Remove the battery from the controller.
5. Place the new battery in the controller, and firmly insert the plug into the battery
connector.
6. Replace the controller cover.
7. Return the controller to the chassis as described in
“Installing a RAID controller or
.
Adding expansion ports
With K2 10G RAID, additional expansion ports can be added to the controller or
controllers.
HO
T
Lock
Battery
Battery plug