Power supply module removal, Upgrade instructions – Grass Valley K2 Summit Client Upgrade Instructions v.8.x Mar.02 2012 User Manual
Page 34
Advertising
2. When replacing the carrier module, the screw attachment sequence is critical, as illustrated.
Slide in
1
Fasten
screw
3
Fasten
screw
Note: You must install the
screw on this side first.
2
Power supply module removal
Access the power supply module from the rear panel. Remove as illustrated.
Slide out
3
Disconnect
power cord
1
Disengage lever
2
34
K2 Summit/Solo Field Kit Upgrade Instructions
02 February 2012
Upgrade instructions
Advertising