6 configuring time settings, 7 indicators and status information, 8 service instructions – Grass Valley K2 TX/MAM Server Installation v.2.2 User Manual
Page 12: Configuring time settings, Indicators and status information, Service instructions
K2 TX/MAM Server Installation and Service Manual - document version: 2.2 - Page 12
6.6 Configuring time settings
On the TX/MAM servers, edit the file
/etc/ntp.conf.
Go to:
## Outside source of synchronized time
##
## server xx.xx.xx.xx # IP address of server
Edit the following line:
## server xx.xx.xx.xx # IP address of server
Remove the # hashes.
Specify the NTP-server’s IP-address.
Example:
## Outside source of synchronized time
##
server 192.33.96.102 # IP address of server
To activate, run the following command:
service ntp restart
7 Indicators and status information
Please refer to the Dell documentation for an explanation of indicators and status information.
8 Service Instructions
Please refer to the Dell documentation for service instructions.