Grass Valley Kaleido-MX (3RU) v.7.80 - Manual (Page 51)

37
Kaleido-MX (3RU)
Hardware Description & Installation Manual
Kaleido-MX Outputs
The Kaleido-MX (3RU) supports two, or four progressive scan HDMI outputs.
The Kaleido-MX (3RU) supports two, or four 3G/HD-SDI outputs (with embedded audio).
HDMI outputs (2, or 4)
Signal HDMI V1.3
Format 1024 × 768 up to 1920 × 1200, configurable (all
progressive scan)
Supported refresh rates: 50 Hz and 59.94 Hz
Audio PCM 24 bits, AC-3
Cable length 15 m (50 ft) with Gefen CAB-HDMI-50MM
Connector HDMI type connector
Signal path 24 bits RGB
HD-SDI monitoring outputs
Signal SMPTE ST 292-1 (1.485, 1.485/1.001 Gbps)
Formats 720p 50 Hz
720p 59.94 Hz
1080i 50 Hz
1080i 59.94 Hz
Audio SMPTE ST 299-1 (limited to one pair, embedded on
group 1, pair 1)
Return loss > 15 dB up to 1.5 GHz
Alignment jitter (100 kHz) < 0.2 UI
Timing jitter (10 Hz) < 2.5 UI
Cable length 100 m (328 ft) (Belden 1694A)
45 m (148 ft) (Belden 1855A)
Connectors DIN 1.0/2.3
Quantization 8 bits
3G-SDI monitoring outputs
Signal SMPTE ST 424 (2.97 Gbps / 2.97/1.001 Gbps)
Formats (Level A only) 1080p 50 Hz
1080p 59.94 Hz
Audio SMPTE ST 299-1 (limited to one pair, embedded on
group 1, pair 1)
Return loss > 15 dB up to 1.5 GHz
> 10 dB up to 3 GHz
Alignment jitter (100 kHz) < 0.3 UI