Grass Valley Maestro Master Control Reference Manual v.2.4.0 - Manual (Page 121)

MAESTRO — Automation Interface Protocol Technical Reference Manual 121
MAESTRO_DVEFFECT
7 = Transition AUX PST MAESTRO_DVE_EFFECT_TRANS_AUX_PST
8 = Audio Only MAESTRO_DVE_EFFECT_AUDIO_ONLY
9 = Swap PGM AUX MAESTRO_DVE_EFFECT_SWAP_PGM_AUX
10 = Rotate PST PGM AUX MAESTRO_DVE_EFFECT_ROTATE_PST_PGM_AUX
11 = Rotate AUX PGM PST MAESTRO_DVE_EFFECT_ROTATE_AUX_PGM_PST
4. The <effectID> argument is ignored with the exception of the following <effectAction> argument
values:
1 = Enter PGM MAESTRO_DVE_EFFECT_ENTER_PGM
3 = Enter AUX MAESTRO_DVE_EFFECT_ENTER_AUX
5 = Enter PST MAESTRO_DVE_EFFECT_ENTER_PST
The <effectID> argument cannot be 0 (effect NOP) for the above <effectAction> parameter val-
ues.
Argument definitions:
<effectID> = 0, 1-255
0 = effect NOP IF_NULL
1-255 = Maps to the order of the DVE Set table.
<effectAction> = 1-11
1 = Enter PGM MAESTRO_DVE_EFFECT_ENTER_PGM
2 = Exit PGM MAESTRO_DVE_EFFECT_EXIT_PGM
3 = Enter AUX MAESTRO_DVE_EFFECT_ENTER_AUX
4 = Exit AUX MAESTRO_DVE_EFFECT_EXIT_AUX
5 = Enter PST MAESTRO_DVE_EFFECT_ENTER_PST
6 = Exit PST MAESTRO_DVE_EFFECT_EXIT_PST
7 = Transition AUX PST MAESTRO_DVE_EFFECT_TRANS_AUX_PST
8 = Audio Only MAESTRO_DVE_EFFECT_AUDIO_ONLY
9 = Swap PGM AUX MAESTRO_DVE_EFFECT_SWAP_PGM_AUX
10 = Rotate PST PGM AUX MAESTRO_DVE_EFFECT_ROTATE_PST_PGM_AUX
11 = Rotate AUX PGM PST MAESTRO_DVE_EFFECT_ROTATE_AUX_PGM_PST
<audioMode> = 0, 1-5
0 = audioMode NOP IF_NULL
1 = PGM Off AUX On MAESTRO_DVE_AUDIO_MODE_PGM_OFF_AUX_ON
2 = PGM On AUX Off MAESTRO_DVE_AUDIO_MODE_PGM_ON_AUX_OFF
3 = PGM On AUX On MAESTRO_DVE_AUDIO_MODE_PGM_ON_AUX_ON
4 = PGM Over AUX MAESTRO_DVE_AUDIO_MODE_PGM_OVER_AUX
5 = AUX Over PGM MAESTRO_DVE_AUDIO_MODE_AUX_OVER_PGM