Grass Valley Using Final Cut Pro With DNP Products Instruction Guide v.5.1 - Manual (Page 2)

Copyright Copyright © 2004 Thomson Broadcast and Media Solutions, Inc. All rights
reserved. Printed in the United States of America.
This document may not be copied in whole or in part, or otherwise reproduced
except as specifically permitted under U.S. copyright law, without the prior written
consent of Thomson Broadcast and Media Solutions, Inc., P.O. Box 59900,
Nevada City, California 95959-7900
Trademarks Grass Valley, NewsEdit XT, and NewsShare are either registered trademarks or
trademarks of Thomson Broadcast and Media Solutions in the United States and/
or other countries. Other trademarks used in this document are either registered
trademarks or trademarks of the manufacturers or vendors of the associated
products. Thomson Broadcast and Media Solutions products are covered by U.S.
and foreign patents, issued and pending. Additional information regarding
Thomson Broadcast and Media Solutions’ trademarks and other proprietary rights
may be found at www.thomsongrassvalleygroup.com.
Disclaimer Product options and specifications subject to change without notice. The
information in this manual is furnished for informational use only, is subject to
change without notice, and should not be construed as a commitment by Thomson
Broadcast and Media Solutions. Thomson Broadcast and Media Solutions
assumes no responsibility or liability for any errors or inaccuracies that may appear
in this publication.
U.S. Government
Restricted Rights
Legend Use, duplication, or disclosure by the United States Government is subject to
restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data
and Computer Software clause at DFARS 252.277-7013 or in subparagraph c(1)
and (2) of the Commercial Computer Software Restricted Rights clause at FAR
52.227-19, as applicable. Manufacturer is Thomson Broadcast and Media
Solutions, Inc., P.O. Box 59900, Nevada City, California 95959-7900 U.S.A.
Revision Status
Rev Date Description
November 30, 2004 Release 071-8381-00 for Software Version 5.1