Chapter 3: configuring smartbin service on nas, Chapter 3, Configuring smartbin service on a nas system – Grass Valley SmartBins v.5.0 User Manual
Page 19
Digital News Production
17
Chapter
3
Configuring SmartBin Service on a NAS
System
If you are using SmartBins on a NAS system, you need to configure your
M-Series iVDR(s) to use SmartBins. If you are using SmartBins on an Open
SAN system, you can skip this step.
To configure the SmartBin Service on a NAS system:
1. Go to
Start | Programs | Vibrint 5.0 | SmartBins Setup Tool
.
The SmartBins Setup Tool opens.
2. Select the
Total Maximum Transfers
from the drop-down list.
The Total Maximum Transfers is the total amount of streams for this particular
instance of the SmartBin Service. Select
4
if the SmartBin Service is installed
on the DSM and select
6
if the SmartBin Service is installed on a standalone PC.
NOTE: Increasing the number of Total Maximum Transfers affects
the bandwidth on the NAS system.