Grass Valley ASD-272p - Manual (Page 6)

ASD-272p
2
2.0 Overall View
Figure 2 illustrates the ASD-272p’s major parts and their
locations. The video source is connected to the S-video
input BNC and the decoded signal is provided by the
4:2:2 output. Error status is provided by the status LED
and mode settings are configured by two 3-position slide
switches. Finally, the power source is connected to the
power connector.
Figure 2: Overall view of the ASD-272p
4:2:2 output
Power connector
S-video input
Status LED
3-position slide switches