Monitor board installation – Grass Valley Profile Analog Composite Monitor User Manual
Page 36
Monitor Board Installation
36
Analog Composite Monitor Installation
12. Install mesh washers (Figure 8) and connect analog composite output cables
to the Analog Composite Monitor board. See Figure 9 for an example
Figure 9. Analog Composite Monitor Board Cable Connections
13. Apply power to the Profile system and start the Profile Configuration
Manager application. Check the graphic representation of the Profile rear
panel. It should indicate the presence of the Analog Composite Monitor
board in slot J12 where you installed the board.
14. Configure the system for the Analog Composite Monitor board as instructed
in the Profile Family User Manual.
J1
J17
J13
J16 J15 J14
J6
J7
J4 J3 J2
J5
J12
J11
J9 J8
J10
0043-1
Out B
Out A
Out C
Out D
Video Out
Analog Composite (Monitor)