Grass Valley Profile Family Audio Signal Processing Board - Manual (Page 18)

ASPB Installation
18 ASPB Installation
Installation Procedures
The procedures that follow take you step-by-step through the installation of the
Audio Signal Processing Board (ASPB).
Procedure Overview
Table 4 contains a list of steps you will perform in this procedure.
Table 4. Procedure overview
Procedure Steps Page
Number
1. Gaining Access To the Profile Chassis Covers 19
2. Removing the Chassis Covers 20
3. Removing the Circuit Board Hold-down Brackets 22
4. Removing Analog Audio I/O Boards (PDR 100 ONLY) 24
5. Installing the ASPB In Recommended Slot Locations 26
6. Connecting Audio Clock and Sharcnet Cables 28
7. Reassembling the Profile Chassis 63
8. Installing Audio Interfaces 65
9. Verifying the Installation 72