Grass Valley STORM 3G - Manual (Page 36)

36 STORM 3G ― Setup Guide
Section
4
Setting Editing Environments
This section describes how to store the information of
the connected devices used for capturing or printing
to tape, and how to configure the devices used while
editing.
Before editing, configure the following editing
environments.
Storing Device Presets
Store and manage the connection information of Grass
Valley products and external devices which are used
for capturing or printing to tape (cameras, decks, web
cameras, and microphones) as the device presets.
By using the device presets stored, Input/Output can be
operated smoothly when capturing or printing to tape.
This section describes how to store a device preset by
an example when STORM 3G is used for input/output.
1
Connect the device used for input/output to STORM
3G.
For HTX-OP1, connect the devices to HTX-OP1 if
necessary.
2
Click "Settings" on the menu bar and click "System
Settings".