Emerson Liebert DS Belts - Manual (Page 2)

While every precaution has been taken to ensure accuracy and
completeness in this literature, Liebert Corporation assumes no
responsibility, and disclaims all liability for damages resulting
from use of this information or for any errors or omissions.
© 2006 Liebert Corporation. All rights reserved throughout
the world. Specifications subject to change without notice.
All names referred to are trademarks or registered trademarks
of their respective owners.
® Liebert and the Liebert logo are registered trademarks
of the Liebert Corporation.
SL-17514 (09/06) Printed in USA
Business-Critical Continuity, Emerson Network
Power and the Emerson Network Power logo
are trademarks and service marks of Emerson
Electric Co. ©2006 Emerson Electric Co.
Emerson Network Power.com
Emerson Network Power.
The global leader in enabling
Business-Critical Continuity ™ .
AC Power Systems
Connectivity
DC Power Systems
Embedded Computing
Embedded Power
Integrated Cabinet Solutions
Outside Plant
Power Switching & Control
Precision Cooling
Services
Site Monitoring
Surge Protection
Liebert Corporation
1050 Dearborn Drive
P.O. Box 29186
Columbus, Ohio 43229
800 877 9222 Phone (U.S. &
Canada Only)
614 888 0246 Phone (Outside U.S.)
614 841 6022 FAX
Via Leonardo Da Vinci 8
Zona Industriale Tognana
35028 Piove Di Sacco (PD)
Italy
39 049 9719 111 Phone
39 049 5841 257 FAX
Emerson Network Power Asia Pacific
7/F., Dah Sing Financial Centre
108 Gloucester Rd, Wanchai
Hong Kong
852 25722201 Phone
852 28029250 FAX
liebert.com
24 x 7 Tech Support
800 222 5877 Phone
614 841 6755 (outside U.S.)
New Liebert Belts
Part Number Matched
QTY Shipped Size
181030P1 QTY=2 B-46
181030P2 QTY=2 B-48
181030P3 QTY=2 B-50
181030P4 QTY=2 B-42
181030P5 QTY=2 B-44
181030P6 QTY=2 B-52
181030P7 QTY=2 B-54
181030P8 QTY=2 B-56
181030P9 QTY=2 B-58
181030P10 QTY=2 B-60
181030P11 QTY=3 B-48
181030P12 QTY=3 B-50
181030P13 QTY=3 B-52
181030P14 QTY=3 B-54
181030P15 QTY=3 B-56
181030P16 QTY=3 B-58
181030P17 QTY=3 B-60
Liebert belts are suitable for use on non-Liebert applications requiring the listed sizes. However,
non-Liebert substitute belts are not appropriate for use on Liebert applications due to specific
engineering tolerances.