Grass Valley TTN-RECL8 - Manual (Page 12)

RECL8 Rev. 2
6
4 Re-clocker configuration
4.1. Re-clocker Mode
Switch 2 on each DIP-switch sets the mode of the re-clocker on each individual in- and output. When the
switch is in LEFT position, the output is re-clocked for 45Mbit/s (DS3), and when in RIGHT position, the
output is re-clocked for 34Mbit/s (E3).
4.2. Pulse shape
Switch 1 on each DIP-switch sets the shape of the pulse for the re-clocker on each individual in- and
output. When the switch is in LEFT position, the pulse is shaped for 34Mbit/s (E3), and when in RIGHT
position, the pulse is shaped for 45Mbit/s (DS3).
Normal switch setting is thus:
Switch
1 2 Re-clocking mode/Pulse shape
L
R 34Mbit/s (E3)
R L 45Mbit/s (DS3)