Grass Valley Turbo iDDR Quick Start - Manual (Page 16)

16
Workstation Operation
06 July 2005
P1 and P2 (Player Channels) Settings
Setting Choices
Video Output Format NTSC (SD), XGA (1024x768), WXGA
(1365x768), 1080i (1920x1080)
Aspect Ratio Standard or Widescreen
Aspect Ratio Conversion Bars, Crop, Bars and Crop
Output Component Type RGB, Y,Pb,Pr
Output Pedestal On or Off
Still-play Mode Field (reduce jitter on freeze frame)
Frame (enhances still graphics display)
Test Mode (colorbars) On or Off (generates colorbars/1kHz 4dbu
audio tone)
Video Gain 0-255
Chroma Gain 0-255
Chroma Phase -127 to +128
Black Level 0-15
Sharpness 0-12
Frame Offset 0-1 frames
Line Offset (coarse) 0-524 lines
Sample Offset (fine) 0-1715 samples
Analog Sub-pixel Offset 0-255
Timing Offset +/-200ms
Display Audio Meters Yes or No
System Settings
Setting Choices
Reference Standard NTSC (59.94) or PAL (50Hz)
Time of Day Source System Clock or LTC Input
Audio Reference Level 0dB, 4dB, 8dB
R1 (Recorder Channel) Settings
Setting Choices
Compression Format MPEG
Recording Data Rate 4,8,12,15 Mb/s
Video Noise Reduction None, Low, Medium, High
Video Input Type SDI, S-Video, Analog Composite,
Analog Component
Audio Input Type Analog or Digital (S/PDIF)
Audio Input Trim (Analog) +/-12dB
Audio Input Format (S/PDIF) 16-bit PCM
AC-3
Timing Offset +/-200ms
Display Audio Meters Yes or No
GPI Output Setup
Setting Choices
Channel None, R1, P1, or P2
Trigger Name <User specified name>
Active High or Low
Panel Setup
Setting Choices
Jog Speed -1x to 1x, -1x to 3x
Shuttle Speed -16x to 16x, -32x to 32x
VAR Setting 0.25x, 0.5x, 0.75x
Always start at
VAR preset Yes or No
GPI Input Setup
Setting Choices
Trigger Channels None, R1, P1, P2
Trigger Action Play, Record, Stop, Rewind, Fast Forward,
Cue Start, Cue End, Eject, Preview, Cue Next
Event, Cue Previous Event, VAR Playback
Active High or Low