Grass Valley XtenDD Ordering Guide - Manual (Page 21)

20 XtenDD Ordering Guide XtenDD Ordering Guide 21
DS 0205 Order no: 0 038 060 500
F0-038060-500
Switcher Operating Software
Needs to be ordered for software update.
RC 2351 Order no: 0 351 772 100
F0-351772-100 with initial order only
Fanless Power Supply Panel RPS35-4/3/2/2S
Replaces the standard and redundant power supply for the control panels.
The fanless power supply is a redundant power supply. Heat-pipe technology
is used instead of fans in order to reduce noise in the control room. Extra
space is needed behind the panel for installation. (Dimensions (approx.): width
45 cm (18 in.), depth 20 cm (8 in.), height 10 cm (4 in.) at the center of the
panel. (For exact figures refer to the “XtenDD Planning Information Guide” or
customer documentation.)
RP x C-UMD series
Under-Monitor Displays (UMDs)
Thomson brand Under-Monitor Displays can be connected directly to frame
(max. 32 units), control panel (max. 32 units), and RSE1 (max. 32 units).
AUX-CP JUP-CP-300
JUP-CP-330
JUP-CP-3020
JUP-CP-3021
Auxiliary Bus Control Panels
The listed types of control panels can be connected to frame (max. four
units), control panel (max. 10 units), and RSE1 (max. 10 units) for crosspoint
selection, and TiM/E Memo shotbox.
JUP-CP-300: 1 RU, 24 source selection buttons, six delegation buttons. Power
Supply: 5 VDC external (e.g., JUP-UNIVPS-110/220). (See pricelist Chapter
Routers – Series 300 Control Panels for details.)
JUP-CP-330: 1 RU, 48 source selection buttons, six delegation buttons. Power
Supply: 5 VDC external (e.g., JUP-UNIVPS-110/220). (See pricelist Chapter
Routers – Series 300 Control Panels for details.)
JUP-CP-3020: 1 RU, 20 large source selection buttons, two delegation
buttons. Power Supply 110/220 VAC. (See pricelist Chapter Routers –
Series 3000 Control Panels for details.)
JUP-CP-3021: 1 RU, 20 large pushbutton extension panel for JUP-CP-3020.
(See pricelist Chapter Routers – Series 3000 Control Panels for details.)