Extron Electronics MAV Series - Manual (Page 53)

5-3 MAV Series Switchers • Matrix Software
Figure 5-1 — Extron Matrix Switchers Control Program window (blank)
Figure 5-2 — Sample program window (complete)
4. To make the control program easier to use, you can assign a device icon to
each input and output. Click on a box that represents an input or output, and
drag the desired icon onto the box from the icon palette that appears.
5. To create a tie, drag an input box to one or more output boxes. To remove a
tie, drag the output box to its tied input box.
Windows buttons
The buttons on the right side of the window perform the following functions:
Power — Unavailable for MAV Series switchers, because the switcher power
cannot be controlled via software.
Executive mode — Allows you to lockout front panel operations, except for the
view-only mode functions
Presets menu — Displays a list of up to 16 presets. You can select a preset from the
list to display it in the window.