Adapter interrupt and i/o address settings, Wan adapters, Dm-8 adapter i/o address settings – Enterasys Networks CSX6000 User Manual

Page 86: Adapter interrupt and i/o address settings 86

Advertising
background image

USER’S GUIDE

86 CyberSWITCH

A

DAPTER

I

NTERRUPT

AND

I/O A

DDRESS

S

ETTINGS

WAN A

DAPTERS

The WAN adapters (except for the RS-232 and V.35) use jumpers to set the interrupt and switches
to set the I/O address. The following chart contains the WAN adapter’s interrupt jumper and I/O
address switch settings required for each configured slot number.

Refer to the

System Adapters Appendix

for location and numbering conventions of the interrupt

block and I/O switch. Note the following:

concerning the interrupt block: On some boards, such as the PRI-8, the interrupt block is num-
bered from left to right, beginning with position 3 on the left. On the PRI-23 and PRI-23/30, the
interrupt block is numbered from right to left, with position 3 starting on the right.

concerning the I/O Switch: If the adapter’s I/O address switches are labeled with open as opposed
to either off or on, open corresponds to off. On the PRI-23/30, S8 on the I/O Switch is not used.
The board should function properly with the switch in either the ON or OFF position.

DM-8 A

DAPTER

I/O A

DDRESS

S

ETTINGS

The DM-8 is unique in that it has no interrupts, and uses jumpers instead of switches for its I/O
address settings. The DM-8 will take on the interrupt of the slot in which it is configured. You only
need to set its I/O address. When configuring DM-8 adapters, use 380 for the I/O address of the

Configured Slot

Interrupt Jumper

(Interrupt Block)

I/O Address Switch Setting (SW1)

1

Position 3

Value 340
S1, S2, S3, S4, S5, S6, S7, S8
on, on, on, off, on, off, off, off

2

Position 11

Value 348
S1, S2, S3, S4, S5, S6, S7, S8
off, on, on, off, on, off, off, off

3

Position 5

Value 350
S1, S2, S3, S4, S5, S6, S7, S8
on, off, on, off, on, off, off, off

4

Position 10

Value 358
S1, S2, S3, S4, S5, S6, S7, S8
off, off, on, off, on, off, off, off

5

Position 7

Value 360
S1, S2, S3, S4, S5, S6, S7, S8
on, on, off, off, on, off, off, off

6

Position 12

Value 368
S1, S2, S3, S4, S5, S6, S7, S8
off, on, off, off, on, off, off, off

Advertising
This manual is related to the following products: