Maintenance – Polaris 2009 Victory Victory Vision User Manual
Page 180
Advertising
177
MAINTENANCE
Maintenance
Spark Plugs
1. Make sure the engine is at room temperature.
2. Pull upward on the spark plug boot (not the wire)
to remove.
3. To prevent debris from entering the spark plug
hole, use compressed air to clean the area around
the plugs before removing them.
4. Remove spark plugs (use a 12 mm plug socket).
5. Both spark plugs should have the same light or
medium tan color deposits. The electrodes should
be square with sharp edges. Replace in pairs if
worn.
WARNING
Wear eye protection when using pressurized air.
0.032 inch
(0.8 mm)
Spark Plug: NGK DCPR6E
Gap: .036
″
(.9mm)
Torque: 8.5 lb-ft. (11 Nm)
(Apply anti-seize compound
sparingly to threads.)
.036
″
(.9mm)
visionownersmanual.book Page 177 Wednesday, February 13, 2008 4:31 PM
Advertising