Emerson Radio MS3110 - Manual (Page 33)

32
Programmed Playback
The Programmed Playback feature allows you to program a total of up to 40 tracks
from among all 3 discs for playback in any desired order. You may program the
same track to play several times within a program sequence if desired.
Note: You cannot program tracks during playback. If a disc is playing press
the STOP button first to stop playback before beginning the programming
steps below.
1.) Load up to 3 discs in the player and wait until the player has read the Table of
Contents of all discs.
2.) Press the PROGRAM or MEMORY
button.
The MEMORY indicator will flash and the
display will show Disc 1, Track 01 and
Program Memory P- 01.
3.) Press one of the DISC (CD) buttons to select the disc that contains the first
track to be programmed. (Example: Disc 3).
Then press the SKIP – ( ) / SKIP +
( ) or TUNING / TUNING buttons s
to select the first track on that disc to be
programmed. (Example: Track 07).
4.) Press the PROGRAM or MEMORY
button again to enter DISC 3 / Track 07
in program m em ory. The program
memory number advance to “P – 02”.
MS3110_112106.p65 22/11/2006, 11:48 32