Maintenance, Front/rear shock compression – Polaris 2011 RZR User Manual
Page 108
Advertising
104
MAINTENANCE
Suspension Settings
(RZR S Premium Models and RZR 4)
Front/Rear Shock Compression
Use a flat-blade screwdriver to make damping
adjustments. The compression damping clicker is
located on top of the shock reservoir, under the
rear fender. When the adjuster screw is turned
clockwise until it stops, the damping is in the
fully closed position.
1. Turn the clicker clockwise (1) to increase
compression damping.
2. Turn the clicker counter-clockwise (2) to
decrease compression damping.
Setting
Compression Damping
Softest
20 clicks from closed
Factory
7 clicks from closed
Firmest
2 clicks from closed
Clicker
1
2
Advertising
This manual is related to the following products: