Polaris 2013 BRUTUS Operators Handbook - Manual

AVOID INJURY OR DEATH
● Never use the vehicle without instructions. Read vehicle signs
(decals), Owner’s Manual and this Handbook.
● Always fasten seat belt before operating or riding in the vehicle.
● Keep hands and feet inside the vehicle.
● Polaris recommends using proper protective equipment such as helmets and
eyewear when required.
● Never use vehicle without Roll-over Protective Structure (ROPS) / Occupant
Protective Structure (OPS).
● Do not modify or remove ROPS / OPS. Replace ROPS / OPS if damaged.
● Keep away from drop-offs, steep slopes and unstable surfaces.
● Always carry bucket or attachment as low as possible. Slow down when
turning. Do not make sharp turns. Look in the direction of travel. Never
attempt jumps or other stunts with the vehicle.
● Load, unload and turn on flat, level ground. Keep load level when raising
lift arm.
● Travel at appropriate vehicle speeds for the type of terrain, visibility,
operating conditions and your operating experience.
● Carry one rider only in the passenger seat.
● Keep bystanders away from the work area.
● Secure load in cargo box.
● Do not exceed Vehicle Load Capacities.
● No riders in cargo box.
● Never modify the vehicle or add attachments not approved.
● Keep PTO shields and all guards in place (if equipped). Keep away from
moving parts.
● Before leaving the operator seat:
Park on flat level ground.
Lower attachment arm.
Put attachment flat on ground.
Move gear selector lever to Park.
Disengage the PTO (if equipped) and make sure all rotating components
are completely stopped.
Stop the engine and remove the key.
OPERATOR’S HANDBOOK
This Handbook is for the
Utility Vehicle Model Brutus HD and HD PTO
WARNING
© 2013 Polaris Sales Inc. Printed in U.S.A. 9924342 (1-13)