Bc a – Electrolux ERF 2830 User Manual

Page 6

Advertising
background image

6

Movable shelves

The walls of the refrigerator have runners so that the
shelves can be positioned as desired .

For better use of space, the front half-shelves can lie
over the rear ones.

Positioning the door shelves

To permit storage of food packages of various sizes,
the door shelves can be adjusted in height.To make
these adjustments proceed as follows:

Gradually pull the shelf in the direction of the arrows
until it comes off, then reposition as required.

D338

15

Instructions for totally built-in
appliances

Door reversal

Recess dimensions

Height (1)

1780

mm

Depth (2)

550

mm

Width (3)

560

mm

To ensure adequate ventilation, allow the clearances
shown in figure.

50 mm

min.

200 cm

2

200 cm

2

min.

D567

Furthermore, it is necessary that the cabinet has a
ventilation recess with the following dimensions:

depth 50

mm

width 540 mm

B

C

A

The appliance is supplied with the right

or left door opening. To change the opening
direction of the door proceed as in the
following instructions before installing it.

1. Unscrew the upper pin and remove the spacer

2. Remove the upper door

3. Unscrew the pins (B) and the spacers (C) and

refit them on the middle hinge of the opposite
side. Snap the hinge cover (A).

4. Refit the upper door, the upper pin and the

spacer on the opposite side

5. Unscrew the lower pin and remove the spacer

and refit them on the opposite side

PR01

540

50

3

2 1

Advertising