HEIDENHAIN ND 522 - Manual (Page 58)

58 I Operating Instructions
I -
4
Tu
rn
ing
Specific
Oper
ations
I - 4 Turning Specific Operations
This section discusses operations, and key functions specific to
turning applications only. Key functions that are the same, whether
the ND 522/523 is configured for Mill, or Turn applications, are detailed
starting on page 17.
Keys Functions Detailed
Turning Specific Display Icons
Tool Hard key
The ND 522/523 can store the dimensional offsets for up to 16 tools.
When a workpiece is changed, and a new datum is established, all
tools are automatically referenced from the new datum.
Before using a tool, its offset must be entered (the cutting edge
position). Tool offsets can be set using the TOOL/SET, or NOTE/SET
features.
If tools have been measured using a tool presetter, the offsets may be
entered directly.
To access the Tool Table menu:
Press the TOOL hard key.
The cursor will default to the TOOL TABLE field.
Scroll to the tool to be defined, and press Enter.
Function Display Icon
This is used to indicate that the displayed value
is a diameter value. No icon visible indicates that
the display is a radius value.
Ø
TOOL TABLE