Ergotron 870-03-005 - Manual (Page 31)

870-03-005 rev. 05/30/03
• ARMS Orderguide • 31
VL Series
The monitor and keyboard move up and down in tandem for ease of use. An optional Slide-Out
Keyboard Tray allows the user to pull out the keyboard to a more comfortable position. The system’s
smooth steel construction is both durable and easy to clean. A quick-connect interface makes monitor
attachment/removal easy.
Part Description Weight Shipping
Number Capacity** Weight
25-022-100, grey* VL Series, VL-9 w/ Standard Keyboard Tray 9–34 lbs 34 lbs
25-022-101, black* (4.1–15.5 kg) (15.5 kg)
25-027-100, grey* VL Series, VL-9 w/ Slide-Out Keyboard Tray 5–30 lbs 40 lbs
(2.3–13.6 kg) (18.2 kg)
97-175-100, grey Retrofit Kit to add Slide-Out Keyboard Tray 5–30 lbs 10 lbs
(2.3–13.6 kg) (4.5 kg)
* Includes Keyboard Tray w/ Sliding Mouse Tray & Wrist Rest Holder (77-050-xxx) and Mouse Pad (85-025-079).
** Combined weight of monitor and keyboard.
Note: • Use of a VESA FDMI Standard compliant flat panel monitor is strongly recommended. We strongly urge you
to contact to verify monitor compatibility prior to ordering. (See page 47 for details.)
• Monitors with cables that exit straight out the back of the monitor, as well as monitors that have
non-removable bases/stands, may not be compatible with the VL Series. The VL Series works best with
cables that exit in a downward or sideward direction.
• Choose a monitor with four-hole mounting pattern at or near top-to-bottom center-line (C/L).
1-1/2" + monitor depth
1-1/2"
(38 mm)
4"
(102 mm)
29-3/8"
(746 mm)
12-1/2"
(318 mm)
4-1/2"
(114 mm) 18-1/4"
(210 mm)
11-3/4"
(300 mm)
29-3/8"
(746 mm)
Page #
38
40
Accessory Options
Wrist Rests & Mouse Accessories
CPU Holders
Storage Components
Peripheral Table
Page #
44
45
46
46
Surface Attachment Options
Direct Mounting
Command Posts
Centerline of Four-Hole
VESA FDMI Pattern
A = 16-1/2 – (B + 3-1/2)
B = Keyboard depth
Fig. 2 Fig. 1
Rear of Monitor
A
A ≤ 7"
(178 mm)
3-1/2" (89 mm)
B
A A ≤ 8-3/4"
(222 mm)
16-1/2"
(419 mm)
Exceptions:
If you want to install your keyboard in a forward
position while remaining
≤ 4" (102 mm) from the
wall, “A” ≤ 7" (178 mm). See Figure 1.
If you want to use a keyboard wrist rest,
dimension “A” can be calculated by adding
3-1/2" (89 mm) to the keyboard depth “B” and
subtracting this sum from 16-1/2" (419 mm).
See Figure 2.
1. Monitor must not be more than 2-1/2" (63 mm) thick.
2. Keyboard should not be more than 7-1/4" (184 mm) deep.
3. Dimension “A” must be no greater than 8-3/4" (222 mm).
4. Slide-Out Keyboard option cannot be used as its depth = 4-1/2" (114 mm).
Mounting Options & Accessories for VL Series
VL Series Attachment
For VL Series to remain less than 4" (102 mm) from the wall when in storage position, follow these guidelines:
Side View
Side View
Slide-Out
Tray model
Front View
Side
View