Emprex Multimedia Enclosure ME3 - Manual (Page 15)

9
B. Component (YPbPr) video and audio
output connection (To have better
video quality)
Plug the black mini plug of the supplied
Component video extension cable into
the YPbPr jack on the ME3. Use a
component (YPbPr) video cable (NOT
supplied) to connect the component
video extension cable and component
(YPbPr) video input port on your TV or
monitor. Be sure to match the color of
the plug with color of the jack on TV or
monitor. ME3 supports NTSC and
PAL progressive scan, 720p, and 1080i
component video output.
Use the supplied composite AV cable
to connect the AV extension cable and
audio input jack of the component input
port on your TV or monitor. Be sure to
match the color of the plug with color of
the jack on TV or monitor.
Note:
Standard component video
cable is NOT included. In
order to have good video
quality, to use a standard
YPbPr component video
cable is suggested.
Only one of the two
connections described
above is required.
Figure Component (YPbPr) connection