Extron electronic PVS 204SA - Manual (Page 3)

3 Extron PVS 204SA Twisted Pair Switcher • Specifications
THD + Noise .................................. 0.2% @ 1 kHz at nominal level (1 watt, 8 ohm load)
S/N .................................................. >67 dB, 20 Hz to 20 kHz at maximum output (unweighted), 8 ohms (as a
system with Extron PVT Series transmitters with 50' cables)
Continuous power output with a full load at 1 kHz, 1% THD
At 4 ohms ........................... 13 watts (rms) per channel (1 watt tolerance)
At 8 ohms ........................... 7 watts (rms) per channel (1 watt tolerance)
Damping factor .............................. >80 (8 ohm load)
Control/remote — switcher
Serial host control ports ............... 2 bidirectional RS-232: 1 rear panel 3.5 mm captive screw connector, 5 pole
(shared with IR control); 1 front panel 2.5 mm stereo mini jack
Baud rate and protocol ................. 9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configurations . Captive screw connector: A = TX, B = RX, C = IR receive, D = GND, E = 12 VDC
2.5 mm mini stereo jack: tip = TX, ring = RX, sleeve = GND
DC volume control port ............... (1) 3.5 mm captive screw connector, 3 pole
DC volume control pin configurations
1 = +10 VDC, 2 = volume/mute (variable voltage), 3 = GND
Volume control voltage range ..... 0 V (mute) to 10 V (maximum volume)
Program control ............................. Extron's Simple Instruction Set (SIS
™ )
General
External power supply ................. 100 VAC to 240 VAC, 50/60 Hz, external; to 12 VDC, 3 A, regulated
Power input requirements ........... 12 VDC, 3 A
Temperature/humidity ................ Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling ........................................... Convection, unvented
Mounting
Pole mount ......................... Yes, with optional PMK 450 pole mounting kit
Enclosure type ............................... Metal
Enclosure dimensions ................... 1.7" H x 8.7" W x 3.0" D (1U high, half rack wide)
4.3 cm H x 22.1 cm W x 7.6 cm D
Product weight .............................. 2.5 lbs (1.1 kg)
Shipping weight ............................ 5 lbs (2.3 kg)
Vibration ......................................... ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety ................................... CE, CUL, UL
EMI/EMC .......................... CE, C-tick, FCC Class A, ICES, VCCI
Warranty ......................................... 3 years parts and labor
N All nominal levels are at ±10%.
N Specifications are subject to change without notice.
7.6-100808-D9-111612