ShoreLand'r SLB30BAL - Manual (Page 6)

Winch Post Assembly
The height that the
bow eye is located on
your boat will
determine the winch
post length required.
Once this is
determined, attach the
winch base to the
tongue with three 1/2”
x 4-1/4” hex bolts and
lock nuts.
Align the holes in the
Profile 2000 winch
head mounting
channel with the holes
in the top of the winch
base. Attach the front
of the winch head
mounting channel to
the base with a 1/2” x
4-1/2” hex bolt through
the hole closest to the
front of the winch
base. Secure with a
lock nut. Do not
tighten.
The winch head can
be rotated either up or
down. Identify the
correct hole
combination to position the bow eye roller just above the bow eye of your boat. Secure in
position by placing the bushing as shown inside the winch base so it aligns with the hole just
identified for the proper adjustment. Insert another 1/2” x 4-1/2” hex bolt through the
determined mounting hole in the mounting channel and winch base making sure the bolt
passes through the bushing.
1/2"1/2 X 4 1/2"
Hex Bolts &
Lock Nuts
Bushing
1/2” X 4 1/4” Hex
Bolts & Lock Nuts
Secure with a 1/2” lock nut. Tighten all bolts.
Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorelandr.com 0004297
Page 6 of 11 2/09/2011