ShoreLand'r LEB22CLW V.2 - Manual (Page 7)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0003282
REV B 2/07/06 Page 7
WINCH POST ASSEMBLY
The height that the bow eye is placed in your boat will determine
the length winch post required. Once this is determined, attach
the winch base to the tongue with three 1/2” x 4-1/2” carriage
bolts and lock nuts.
Align the holes in the Profile 2000 mounting channel with the
holes in the top of the winch base. Attach the front of the winch
head mounting channel to the base by placing a 1/2” x 4-1/2”
hex bolt through the hole closest to the front of the winch base.
Secure with a lock nut. Do not tighten.
Note that the winch head can now be rotated either
up or down. Identify the correct hole combination to use to
position the bow eye roller just above the bow eye of your
boat. When determined, secure in this position by placing
the bushing (Item #4) as shown in Diagram C inside the winch
base so it aligns with the hole just identified for the proper
adjustment. Insert another 1/2” x 4-1/2” hex bolt through
the determined mounting hole in the mounting channel and
winch base making sure the bolt passes through the
bushing as well.
Secure with a 1/2” lock nut. Tighten all bolts.