Ei Electronics Carbon Mo-noxide Alarm Ei261ENRC - Manual (Page 2)

Shannon Free Zone, Shannon, Co. Clare, Ireland.
Ph. +353 61 471277 Fx. +353 61 471053
Email. [email protected]
Web: www.eielectronics.com
E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice . Ei261ENRC DataSht RevA
Technical Specification
Sensor Electrochemical sensor
Sensitivity:
Meets BS EN 50291:2001
Button Test: Checks the electronics and horn
Fast CO Test Mode:
Alarm sounds and red indicator
flashes as soon as CO is detected
–
the rate of flash indicating the CO
level
Memory Feature
A fter the unit has been in alarm, the red
indicator will flash every 40 seconds at a
rate indicating the CO level previously
detected. Pressing the “Test/Hush”
button will also cause the red indicator
to flash at a rate specific to the
previously sensed CO level.
Automatic Self-Test: Horn beeps and amber fault light
flashes every 40 seconds if a sensor
fault is found
Supply Voltage: 230V AC, 50 Hz
Battery back up: Rechargeable Lithium cells
Dimensions: 126 x 150 x 42 mm
Weight: 300g
Model Ei261ENRC CO Alarm
Power-On Indicator: Continuous green LED
Alarm:
Electronic Piezoelectric horn
Alarm Sound Output:
85dB(A) (minimum) at 3m
Alarm Status:
Red LED flashes and horn sounds
Normal Operating
Temperature Range:
-10 o to +40 o C
Humidity Range:
15% to 95% Relative Humidity
Interconnect: Up to 12 interconnected
- Ei261ENRC/261DENRC CO alarm
- Ei161RC/164RC/166RC smoke or
heat alarms
- Ei128RBU relay base
Use with optional control (see below)
Optional Controls:
- Ei1529RC Control Switch
- MCP401RC Manual Call Point
Fixing:
Easi-Fit mounting base
Plastic material:
UL94VO flame retardant
Guarantee:
5 year (limited)
Approvals:
Kitemarked to BSEN 50291:2001,
(License no. KM86596) and CE
certified
Specifications are subject to change
System Wiring
Wiring for Interconnected Alarms with optional Remote System Control Switch & Manual Call Point
Ensure correct wiring of the alarms and switches as mixing Live and Neutral will blow / damage interconnected units.