ShoreLand'r SLB2314S - Manual (Page 7)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0003357
Page 7 REV A 6/13/05
WINCH POST ASSEMBLY
The height that the bow eye is placed
in your boat will determine the length
winch post required. Once this is de-
termined, attach the winch base to the
tongue with three 1/2” x 4-1/2” car-
riage bolts and lock nuts.
Align the holes in the Profile 2000
mounting channel with the holes in the
top of the winch base. Attach the front
of the winch head mounting channel to
the base by placing a 1/2” x 4-1/2” hex
bolt through the hole closest to the front
of the winch base. Secure with a lock
nut. Do not tighten.
Note that the winch head can now
be rotated either up or down. Identify
the correct hole combination to use to
position the bow eye roller just above
the bow eye of your boat. When
determined, secure in this position
by placing the bushing as shown in
Diagram C inside the winch base so it
aligns with the hole just identified for the
proper adjustment. Insert another 1/2” x
4-1/2” hex bolt through the determined
mounting hole in the mounting channel
and winch base making sure the bolt
passes through the bushing as well.
Secure with a 1/2” lock nut. Tighten all
bolts.