ShoreLand'r SLXR2313LW V.1 - Manual (Page 7)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0003406
Page 7
WINCH POST ASSEMBLY
The height that the bow eye is placed in your boat will
determine the length winch post required. Once this is
determined, attach the winch base to the tongue with
three 1/2” x 4-1/2” carriage bolts and lock nuts.
Align the holes in the Profile 2000 mounting channel with
the holes in the top of the winch base. Attach the front of the
winch head mounting channel to the base by placing a 1/2”
x 4-1/2” hex bolt through the hole closest to the front of the
winch base. Secure with a lock nut. Do not tighten.
Note that the winch head can now be rotated either up or
down. Identify the correct hole combination to use to position
the bow eye roller just above the bow eye of your boat. When
determined, secure in this position by placing the bushing as
shown in Diagram C inside the winch base so it aligns with the
hole just identified for the proper adjustment. Insert another
1/2” x 4-1/2” hex bolt through the determined mounting hole
in the mounting channel and winch base making sure the bolt
passes through the bushing as well. Secure with a 1/2” lock
nut. Tighten all bolts.