ShoreLand'r SLXR2314SW V.2 - Manual (Page 10)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0003371
Page 10 REV B 9/21/06
XR SERIES
The XR-series rear roller rack is installed by placing the roller
arm assembly mounting channel over the rear cross member
and securing in place with a 1/2” x 4-1/4” hex bolt and lock
nut. (See Diagram A). Note that it should be left loose until
the boat is placed on the trailer. Repeat on the other roller
arm assembly. Once the proper location is determined, it
may be tightened.