ShoreLand'r TA0016 V.2 - Manual

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0003264
REV B 12/06/04
Page 1
Reservoir Caps
Brakeline Port
®
Titan BrakeRite
Electric Over Hydraulic Brake Kits
BRAKE KIT TRAILER SIZE TRAILER MODELS
TA0016 Under 6,000 lbs. GVWR 3,000, 4,000 & 4600 lb. Aluminum
3,000, 4,000, & 4600 lb. Steel
Diagram A
The electric over hydraulic brake system is designed to replace the
hydraulic surge brake actuator that was shipped on your trailer as
standard equipment. The electric over hydraulic system is activat-
ed electrically when you apply the brakes on the tow vehicle. It can
also be operated by a manual cab control inside the tow vehicle
that allows the operator to apply the brakes on the trailer without
applying the brakes on the tow vehicle.
The kit is designed to adapt to different size trailer frames in
both steel and aluminum trailer construction. You will have
extra parts and fasteners above what is required for your
particular application.
The following instructions are written to address the different instal-
lations and will refer to the various diagrams for clarity. Note that
the view shown may not necessarily be an exact view of your trailer
but the instructions will direct you to how to change your existing
trailer brake system to the electric over hydraulic system.