ShoreLand'r TA0148 - Manual

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003897
Page 1 REV A 04/15/2008
ACCESSORY
TA0148-03
24” Side Stop for all Powersports Trailers
The TA0148-03 side stop kit is a 2 ft. wide stop that fits on
the side frame tube of any PS (Powersports) trailer.
The
TA0148-03 is designed and is supplied with two dif-
ferent size U-bolts so it can be mounted to either a 2x3”
or 2x4” side frame.
The spacing of the upright mounting channels on the
TA0148-03 can be mounted on either the inside or the
outside of the frame.
Installation Instructions
• Locate the hardware bag and sort all items by size.
• Locate and determine the correct size U-bolts needed to mount
the TA0148-03 to the side frame of the trailer it is going to be
mounted on.
• Determine the location where the TA0148-03 Side Stop Kit
is going to be mounted. The TA0148-03 can be mounted on
either the inside or the outside of the frame tubing. If it is to be
mounted on the inside of the frame tube, the upright mounting
channels will be placed between the deck planking and the U-
bolts inserted from the outside in.
• Holding the TA0148-03 in the desired position, place a U-bolt
over the frame tube between the deck planking and insert the
legs of the U-bolt into the mating holes provided in the upright
mounting channels.
• Place on a 3/8” flat washer, lock washer, and hex nut. Hand
tighten.
• Repeat the above step on the other upright mounting chan-
nel.
• Once it is determined that the stop is in its correct location,
tighten the U-bolts securely.
• Place the black plastic end caps onto the ends of the TA0148-
03 tube.
• Assembly is complete.