ShoreLand'r TA1032 - Manual

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003497
Page 1
ACCESSORY
TA1032
Post Loadguide
Assembly Instructions:
Remove hardware, open and dump out contents and sort,
divide sorted contents into two piles, one for each side of
trailer. Mount post loadguide assembly onto rear cross mem-
ber or rear pivot tube, slide square u-bolt down thru slots in
the mounting bracket and over the rear cross tube or rear
pivot tube, and slide an adjustable clamp over the threaded
ends of the u-bolts in the slots. Add a loadguide clamp to
the u-bolt, now on one leg of the u-bolt slide a cup washer,
spring, another cup washer and a flange lock nut. Repeat on
the other leg of the u-bolt, and then repeat all steps on the
other side of the trailer. Adjust the loadguides in or out to the
proper location, tighten all nuts.